Factory Cheap Hot Label Machine For Cosmetics - Four Nozzle Cosmetic Glue Dispensing Filling Gluing Machine – GIENI

  TECHNICAL PARAMETER

Four Nozzle Cosmetic Glue Dispensing Filling Gluing Machine

  Features

Standard automatic glue dispenser (with conveyor belt): The automatic glue dispenser can be placed at the head of the main production line and equipped with a glue dispensing conveyor belt.

Manually place the powder box on the conveyor belt of the equipment, and the powder box is transported to the dispensing work area by the conveyor belt. The dispensing robot controls the multi-head valve to automatically dispense glue to the multi-hole powder box. After dispensing, the powder box is automatically transported to the docking station. Mainstream pipeline conveyor belt.

The length of the conveyor belt of the equipment is about 1500mm, the width of the belt is about 340mm, and the height is about 750mm (can be fine-tuned), plus positioning guide rails. It can meet the dispensing requirements of complex hole-position powder boxes and multi-layer powder boxes;

For the powder box with fewer holes, it can be dispensed in real time while the conveyor belt is traveling.

  Application

Automatic Powder Case Gluing Machine is self-designed by our company, which is used for gluing cosmetic powder case. The time, distance, gluing pot and glue volume are all adjustable. It is widely used in color cosmetic industry.

  Why choose us?

1. Configure the X, Y, Z three-axis position independently controllable robotic arm. The left and right and front and rear directions of the dispensing robot are driven by servo motors, and the upper and lower axes are driven by stepper motors. Satisfy powder

Different hole positions of the box (including the hole position special-shaped powder box) and the dispensing requirements of the multi-layer powder box. The left and right stroke of the robotic arm is about 350mm, the front and rear stroke is about 300mm, and the up and down stroke is about 120mm.

2. Equipped with 4 sets of dispensing valves and 4 sets of dispensing heads, the glue volume of each dispensing valve can be adjusted independently, and the glue can be switched on and off independently. According to the hole arrangement of the powder box, the position of the glue dispensing needle of the 4-head valve can be flexibly adjusted, and the glue dispensing point size is the same.

3. The glue is white latex, and the dispensing speed is about 5~7 times/head/second.

4. Equipped with 1 pressure barrel glue storage tank (stainless steel) with a capacity of 15L.

5. Adopt PLC controller with touch screen man-machine interface. Process parameters such as dispensing position, dispensing amount and dispensing time can be set, and dispensing procedures of various powder boxes can be saved.

Called as needed to meet the dispensing requirements of special-shaped or porous powder boxes.